• Unlock Motorola cellular mobile phnones

    How to enter my Unlock Code on Motorola ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    Model : All Motorola cellular phones

    1 – Switch ON your phone with a not allowed SIM Card,
    2 – Phone show “Enter Special Code”,
    3 – You can now enter the Unlock Code we send to you.

    WARNING : If one of theses messages appear :

    - “Contact Service Provider”
    - “Tampert Alter”
    - “Wait before enter special Code”
    - “Contact Service’

    It’s because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message “Enter Code Special” will appear again !

    Model : Motorola A1000 A-1000 and other A models phones

    1 – Click on the icon Phone
    2 – Enter the following keys: ** 057 *
    3 – Mobile displays “locking enter personalization”
    4 – Enter the unlock code
    5 – Click Ok

    Model : Motorola L6i L-6i & L7i L-7i (not L6 and L7 without “i”) phones

    1 – Press and hold “*” key by dialing code 787090
    2 – The mobile displays: “Menu. Network”
    3 – Choose ‘yes’ and then press OK
    4 – The mobile ask you for code
    5 – Enter the code for unlocking.

    Motorola 3G cellular phone

    If your phone is on a 3G network enter **057*
    Then enter the unlock code into the window

    Motorola CDMA & TDMA cellular mobile phones

    Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
    Enter the code you receive
    Your phone is now unlocked

    Motorola MPX cellular phone

    Switch ON your phone with a not allowed SIM card
    If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
    If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
    Your phone is now unlocked
    If phone is asking for NETWORK PUK
    Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
    Type * # * * 3 6 4 # and press green button
    You will get a error message and after it your will see Engineering menu
    Click Options
    Click GSM Test
    Select Send AT command
    Now you will see a new window Saying “Send AT Command”
    Type AT+CLCK=”PN”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send
    If you get Response “0 []” phone is unlocked
    If you get 1 error, then make sure you have typed the code correct and try the other code
    Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message “Enter NETWORK PUK” is gone. Now enter the code received from us and 00000000 (eight zero’s) as a new password.

    If phone is asking for SERVICE PROVIDER PUK

    Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
    Type * # * * 3 6 4 # and press green button
    You will get a error message and after it your will see Engineering menu
    Click Options
    Click GSM Test
    Select Send AT command
    Now you will see a new window Saying “Send AT Command”
    Type AT+CLCK=”PP”,0,”[SERVICE PROVIDER PIN or NETWORK PIN]” and press send
    If you get Response “0 []” phone is unlocked
    If you get 1 error, then make sure you have typed the code correct and try the other code
    If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you

    Model: V3xxr V3 xxr from AT&T Boot 06.24

    For those who are experiencing problems with this phone you use this procedure

    1 – Get the code from our server
    2 – Download Motorola Radiocomm v11.7.4
    3 – Install Radiocomm and all needed drivers (we recommend 3.5 version)

    4 – Open radiocomm and attach the phone wait until phone get connected to radiocomm or until drivers are fully installed if thats the case press “get imei” in radiocomm if imei appears in the screen the we are ready.

    5 – Press “gsm3″ tab and in the left side of the screen look for “sbsdy_lck” and select “get status” and hit execute if the phone returns 01 means that your phone is locked.

    6 – Now select check if valid and enter the 16 digits code from server and hit execute in the upper side of the screen must be appears that subsidy code is done know turn fo your phone and power it on and thats it

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Mitsubishi cellular mobile phone

    How to enter my Unlock Code on Mitsubishi ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)

    Model : Trium Mars cellular mobile phone

    1 – Swith ON your phone without SIM Card,
    2 – Press * and without release compose : 787090 or 787292,
    3 – The menu “Unlock Network” will appear,
    4 – Select “YES” and enter the Unlock we send to you.

    Model : Mitsubishi M341i M-341i cellular mobile phone

    1 – Swith ON your phone with an Accepted SIM Card,
    2 – Press * and without release compose : 787292,
    3 – The menu “Unlock Network” will appear,
    4 – Select “YES” and enter the Unlock we send to you.

    Model : Mitsubishi M342i M-342i cellular mobile phone

    1 – Swith ON your phone with an Accepted SIM Card,
    2 – Press * and without release compose : 787090,
    3 – The menu “Unlock Network” will appear,
    4 – Select “YES” and enter the Unlock we send to you.

    Model : All Mitsubishi  cellular mobile phones

    1 – Switch ON your phone without SIM Card,
    2 – Press * and without release compose : 787292 or 78729,
    3 – The menu “Unlock Network” will appear,
    4 – Select “YES” and enter the Unlock we send to you.

     

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock LG Electronics cellular mobile phone

    How to enter my Unlock Code on LG Electronics ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    Model: LG GT350 GT 350 Town cellular phone1. Power on the LG GT350 Town with the original SIM card in.
    2. Enter 2945#*350#
    3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
    4. Enter your unlock code and hit OK.
    5. The LG GT350 Town will restart..
    6. Put in any sim card you want, you will need to make a call for the new sim card to initialise with the phone.
    7. Thats it, mobile unlocked.Model: LG GM360 GM 360 Viewty Snap cellular phone

    1. Power on your LG Viewty GM360 with the original SIM card in.
    2. Enter 2945#*360#
    3. A menu will pop up, select SIM Unlock.
    4. Enter your unlock code and hit OK.

    Model: LG GS290 GS 290 Cookie Fresh cellular phone

    1. Power phone ON with original SIM
    2. Type 2945#*290# to enter unlock menu
    3. Enter the unlocking code

    Model: LG GT400 GT 400 cellular phone

    1. Turn phone on without simcard
    2. Press telephone icon at bottom of screen to bring up the phone keypad
    3. Enter 2945#*400#
    4. A menu will pop up, select network unlock
    5. Enter your unlock code and press ok
    6. The phone will then reboot and the unlock is complete

    Model: LG GW620 GW 620  cellular phone

    1. power phone ON with original SIM
    2. type 2945#*620# to enter unlock menu
    3. Enter the unlocking code

    Model: LG GM205  GM-205   cellular phone

    1. switch on your phone with original working simcard
    2. enter code 2495#71001# .. nothing will show in the screen.
    3. now go to menu > setting > security > simlock > network lock > deactivate: enter your unlock code in it

    Model: LG GW820 GW-820  eXpo  cellular phone

    1. Power on your LG GW820 eXpo with the original SIM card in.
    2. Enter 2945#*700#
    3. A menu will pop up, select SIM Unlock.
    4. Enter your unlock code and hit OK.
    5. Your LG GW820 eXpo may automatically reboot.

    Model : LG GM205 GM-205  cellular phone

    1. Power phone ON with original SIM
    2. Type 2945#*71001# to enter unlock menu
    3. Enter the unlocking code

    Model: LG GB250 GB-250 and GB220 GB-220  cellular phone

    1. Power on your phone without SIM card
    2. Enter 2945#*71001#
    3. From the menu that pops up select “SIM unlock”
    4. Enter unlock code you received from us and press OK
    5. The phone will then reboot and the unlock is complete

    Model : LG GW520 GW-520 cellular phone

    1. power phone ON with original SIM
    2. type 2945#*71001# to enter unlock menu
    3. Enter the unlocking code

    Model : LG Viewty / GW300  GW-300 cellular phone

    1. Power on your LG Viewty GW300 with the original SIM card in.
    2. Enter 2945#*700#
    3. A menu will pop up, select SIM Unlock.
    4. Enter your unlock code and hit OK. (Entering multiple incorrect unlock codes may permanently lock your phone!)
    5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!

    Model: LG BL20 BL-20 cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*20#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok

    Model: LG BL40 BL-40 cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*40#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok

    Model : LG C1100 C-1100 cellular phone

    - First you must put in an allowed simcard, then :
    - type 2945#*1201#.
    - Goto Menu/Settings/Security Settings/Sim Locks
    - Select ‘Locktype’/Deactivate and Enter the code.

    Model : LG GT505 GT-505 cellular phone

    - power phone ON without SIM
    - type 2945#*505# to enter unlock menu
    - enter unlock code

    Model : LG GB250 GB-250 cellular phone

    - power phone ON without SIM
    - type 2945#*71001# to enter unlock menu
    - enter unlock code

    Model : LG GW520 GW-520   cellular phone

    - power phone ON without SIM
    - type 2945#*71001# to enter unlock menu
    - enter unlock code !

    Model : LG KB770 KB-770 cellular phone

    1. Power on phone with original SIM card
    2. Type 2945*#770#
    3. In the menu that appears select Sim unlock
    4. Enter supplied unlock code
    5. Your phone is unlocked

    Model : LG KP170 KP-170 cellular phone

    1 – Switch ON your phone with a T Mobile Sim inserted
    2 – Press telephone icon at bottom of screen to bring up the phone keypad
    3 – Then compose : 2945#*170#
    4 – A menu will pop up, select Unlock Usim
    5 – Then Select Network Lock
    6 – Enter your unlock code and press ok (you only have 10 attempts)
    7 – The phone will then reboot and the unlock is complete.

    Model: LG CU-515 CU515 cellular phone

    1.Put a SP-locked sim in the phone, phone say invalid smart chip
    2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
    Phone will be unlocked!

    Model : LG TE365 TE-365 cellular phone

    1. Power on phone with original SIM card
    2. Type *#0001#code#
    3. Your phone is unlocked

    Model : LG CT810 (Incite) CT-810  cellular phone

    1. Power on phone with original SIM card
    2. Type 2945#*810#
    3. In the menu that appears select Sim unlock
    4. Enter supplied unlock code
    5. Your phone is unlocked

    Model : LG CB630 (Invision)  CB6-30  cellular phone

    1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
    2) Dial this into the LG Incite’s phone menu
    3) *#865625#
    4) Press CALL.
    5) It should you ask you for the code.

    Model : LG U830 U-830 cellular phone

    1. Have your unlock code handy.
    2. InserI a

    3 SIM card in the phone and switch power on.
    3. Enter the following key sequence 94471877#*#
    4. Select the option â€Ëœunlock USIMâ€&â„¢.
    5. Select the option â€Ëœnetwork unlockâ€&â„¢
    6. Enter your unlock code.
    7. Handset should now display â€Ëœnetwork unlock successâ€&â„¢.
    8. Handset will now restart.Model : LG KF300 KF-300 cellular phone1. Put wrong simcard

     (sim card that is not from the carrier that the phone is assigned to)
    2. Phone alert ‘insert correct card’
    3. Right under in screen you see deblokkeren (dutch)
    4. Click on it en click ‘Network lock off’
    5. Insert code!Model : LG KP100 KP-100 cellular phone1. Insert original sim card and turn phone on.
    2. Enter 2945#*20001#
    3. Sim unlock mode pop up .
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG KF755d KF-755d cellular phone

    1. Insert original sim card and turn phone on
    2. Press telephone icon at bottom of screen to bring up the phone keypad
    3. Enter 2945#*755# (or 2945#*750# if 1st option doesn’t work)
    4. A menu will pop up, select sim unlock
    5. Enter your unlock code and press ok
    6. The phone will then reboot and the unlock is complete

    Model : LG Incite CT-810 CT810 cellular phone

    - Insert a SIM from the original network
    - 2945#*810# will show the unlock menu
    - Enter unlock code

    Model : LG KP265 KP-265 cellular phone

    1 – Use Original SIM to switch ON the Phone.
    2 – Compose 2945#*265#
    3 – Then go to MENU > SETTINGS > SECURITY
    4 – Then go to SIM LOCKS > NETWORK > DESACTIVATE
    5 – ENTER NCK (your Unlock Code)

    Model : LG ME550 ME-550 cellular phone

    1 – Use Original SIM to switch ON the Phone.
    2 – Compose 2945#*71101#.
    3 – Menu will appear, go to settings > security > sim lock
    4 – Enter NCK ( Unlock Code ) and press OK.

    Model : LG TU915 TU-915TU915   cellular phone

    - Switch ON your phone with an allowed SIM Card
    - Then compose: 2945#*9701#
    - It should you ask you for the code.

    OR

    Enter *#865625# then enter your 16 digits code.

    Model : LG KF390 KF-390 KF390q KF-390q and CF360 CF-360  cellular phone

    1) Insert a SIM Card from the network the mobile is locked to and turn it on
    2) Insert the following sequence *#865625#;
    3) Select ‘Unlock USIM’
    4) Select ‘Network Lock’
    5) Insert the unlock code
    6) Select ok. Done!

    Model : LG G910  LG G-910 KF390q KF-390q cellular phone

    1. Insert an invalid simcard and turn phone on.

     (sim card that is not from the carrier that the phone is assigned to)
    2. Insert PIN
    3. Phone says \”Invalid sim card\”
    4. Select \”Emergency calls\”
    5. Enter 2945#*71001#
    6. Sim unlock mode pop up
    7. Select netlock
    8. Enter your 16-digit unlock code and press ok
    9. The phone will then reboot and the unlock is complete.Model : LG Prada, KE850 KE-850 cellular phone1. Switch the telephone on with Original SIM card inside.
    2. Enter SIM pin if required.
    3. Enter 2945#*8501# and press the call button (middle button bottom of the screen).
    4. SIM unlock mode will appear on screen.
    5. Enter unlock code
    6. Select Reboot.
    7. Switch phone off, and then turn back on again. Phone is now unlocked

    Model : LG CT810  CT-810  cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*810#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG VU CU915 CU-915 & CU-920 CU920 (Vu) cellular phone

    1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
    2. Enter *#865625# then the 16 digit unlock code
    3. Device should say: Network Lock Deactivated
    4. Phone may automatically reboot and is now unlocked !

    Model : LG U310 U-310 cellular phone

    1. Turn ON the phone without SIM Card :
    2. Enter 815118#*#
    3. Sim unlock mode pop up .
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG iQ cellular phone

    1 – Switch ON mobile with a not Allowed SIM Card,

    (sim card that is not from the carrier that the phone is assigned to)
    2 – If phone ask, enter the PIN code of your SIM Card
    3 – Now phone will ask you to enter the unlocking code !Model : LG KC550 KC-550 KS360 KS-360  KP230 KP-230 KP500 KP-500 KP501  KP-501  KP270 KP-270 KM900 KM-900 KM500 KM-500  GT810   GT-810 GC900 GC-900 GT360 GT-360  cellular phone1. Insert original sim card and turn phone on.
    2. Enter 2945#*71001#
    3. Sim unlock mode pop up .
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG KF700 aka LG Virgo KF-700  cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*700#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG KC910 LG KC-910 KF910 KF-910 (aka LG Prada) cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*910#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG KF750 KF-750 cellular phone

    1. insert original sim card and turn phone on.
    2. Enter 2945#*750#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG KF600 KF-600 cellular phone

    1. Insert original sim card and turn phone on.
    2. Enter 2945#*71001#
    3. Sim unlock mode pop up .
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    Model : LG U970 U-970 cellular phone

    1. Insert original sim card and turn phone on.
    2. Enter 2945#*970#
    3. A menu will pop up, select Unlock Usim.
    4. Select Network Lock.
    5. Enter the unlock code and ok.

    Model : LG U300 U-300 cellular phone

    1 – Switch ON the phone with Accepted SIM Card (from Original Network Provider)
    2 – Enter Code : 815118#*#
    3 – then phone will ask to enter NCK

    Model : LG C2000  C-2000  cellular phone

    1) Insert non-Cingular SIM card

     (sim card that is not from the carrier that the phone is assigned to)
    2) Power on the handset – phone will display “phone restricted”
    3) Select “Cancel” – phone will display “phone restriction code”
    4) Enter the SIM Unlock code
    5) Select “OK” – the handset is now successfully unlockedModel : LG KU990 Viewty & KE-990 cellular phone1. insert original sim card and turn phone on.
    2. Press telephone icon at bottom of screen to bring up the phone keypad
    3. Enter 2945#*990#
    4. A menu will pop up, select sim unlock
    5. Enter your unlock code and press ok
    6. The phone will then reboot and the unlock is complete.

    or

    1. Without sim phone power “ON”
    2. Hold “camera” + “lock” button
    3. You will get key pad write 2945#*990#.
    4. Press active code.
    5. Your cellphone will be restart
    6. Turn off cellphone and insert your sim (internation sim)
    7. Enjoy your unlocked phone !

    Model : LG TU720  LG CU-720 (Shine) cellular phone

    1) Power ON your phone with not allowed sim card (one that didn’t come with the phone)  (sim card that is not from the carrier that the phone is assigned to)
    2) Type *#865625#
    3) the phone will ask you to input the unlock code twice, just input the unlock code
    4) Device is now unlocked

    Model : LG CE110 CE-110 cellular phone

    1) Put a non AT&T or Cingular SIM in the phone;
    2) The phone display: Invalid Smart Chip
    3) Power on handset
    4) Select “Cancel” – phone displays “phone restriction code”
    5) Enter the unlock code (8 digit code*)
    6) Select “OKâ€&â„¢” – the handset is successfully unlocked

    Model : LG GR500 GR-500 (Xenon) cellular phone

    1) Insert not-allowed SIM card

     (sim card that is not from the carrier that the phone is assigned to)
    2) Power on the handset- phone will display “phone restricted”
    3) Select “Cancel” – phone will display “phone restriction code”
    4) Enter the SIM unlock code
    5) Select “OK” – the handset is now successfully unlockedor1. insert original sim card and turn phone on.
    2. Enter 2945#*9701#
    3. A menu will pop up, select sim unlock
    4. Enter your unlock code and press ok
    5. The phone will then reboot and the unlock is complete.

    or

    After turning on your mobile phone, press: *#865625#
    Press Yes to continue.
    Enter the 16 digit Subsidy Unlock Code
    Enter the 16 digit Subsidy Unlock Code, again.
    Device should say: â€Å“Network Lock Deactivatedâ€Â
    Phone may automatically reboot

    Model : LG CU320 CU320  cellular phone

    1) Power on the handset
    2) In Idle screen, input the special code “277634#*#”.
    3) Enter the SIM Unlock code
    4) Access the submenu “SIM Test” in Phone Test Mode.
    5) Input the special code “2945#*#”.
    6) Access the submenu “SIM Unlock” which is just activated after the special code.
    7) Input the 8-digit Unlock code in the “Enter unlock code” input screen.
    8) It will be unlocked.

    Model : LG CU400 CU-400 CU405 CU-405 cellular phone

    1) Insert non-Cingular SIM card”

     (sim card that is not from the carrier that the phone is assigned to)
    2) Power on the handset – Phone will display “Invalid SmartChip”.
    3) Enter 159753#*#
    4) Enter the 8 digit SIM Unlock code
    5) Select “OK”.
    6) The handset will be unlocked.Model : LG CU500 CU-500 cellular phone1) Insert non-Cingular SIM card.

     (sim card that is not from the carrier that the phone is assigned to)
    2) Power on the handset. Phone will display “Invalid SmartChip”
    3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
    4) In Idle screen, enter 159753#*#. Phone will display “Enter NCK, Remaining 5
    5) Enter the 8 digit SIM unlock code
    6) Select “OK”
    7) The handset is now successfully unlocked.Model : LG CU515 CU-515 CU575 CU-575 (Trax) cellular phone1) Put a non-Cingular sim in the phone

     (sim card that is not from the carrier that the phone is assigned to)
    2) Phone says invalid smart chip
    3) Now enter *#865625# then select option 1 and then again select 1
    4) Enter your 16 digits code
    5) Device should say: Network Lock Deactivated
    6) The handset is unlocked.Model : LG GT365 GT-365 cellular phone1. Insert original carrier sim card in the phone; it does not have to be an active SIM.
    2. Enter *#865625#
    3. Press Yes to continue.
    4. Enter the unlock code.
    5. Enter the unlock code AGAIN.
    6. Device should say: Network Lock Deactivated 
    7. Reboot and is now unlocked! 

    Model : LG U8150 U-8150 cellular phone1 – Switch ON your phone with a NOT Allowed SIM Card,
     (sim card that is not from the carrier that the phone is assigned to)
    2 – Compose : 2, 7, 7, 6, 3, 4, #, *, #,
    3 – Go to menu “SIM Lock”,
    4 – Enter the Unlock Code we send to you.Model : LG U400 U-400 cellular phone1. Insert the network SIM in the handset which has given u the LG U400.
    2. Enter 2945#*88110#.
    3. The phone will then prompt ‘Unlock sim’. Press OK.
    4. The phone will then prompt ‘Network Unlock’. Press OK.
    5. The phone will then prompt- ‘Input Network Control Key’.

    Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.

    6. It should give you the message Success.
    7. Come back to the main screen and Enter 2945#*88110#.
    8. The phone will then prompt unlock sim. Press OK.
    9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
    10. Then press OK

    Model : All other model

    1 – Switch ON your phone with an Allowed SIM Card,
    2 – Then compose :

    2945#*5101# – (if you have a LG 510w model phone)
    1945#*5101# – (if you have a LG 1200 & B1200 model phone)
    2945#*5221# – (if you have a LG 5200 & 52200 model phone)
    2945#*5301# – (if you have a LG 5300 model phone)
    2945#*5401# – (if you have a LG 5400 model phone)
    2945#*70001# – (if you have a LG 7020 model phone)
    2945#*7101# – (if you have a LG 7100 model phone)
    2945#*1201# or 2945#*70001# – (if you have a LG 1100)
    2945#*70001# – (if you have a LG7250T model phone)
    2945#*2201# – (if you have a LG C2200 model phone)
    2945#*5301# – (if you have a LG T5100 model phone)
    2945#*3311# – (if you have a LG C3310 model phone)

    3 – Go to “Menu” and then to “Settings”,
    4 – Then select “Security”,
    5 – To finish select “Network Provider” and select “Desactivate”
    6 – Enter the Unlock Code we send to you.

    Model : To Classify

    For the next models u must to insert the original SIM:

    LG KF245c KF-245c mobile phone press 2945#*7101#
    LG C3100 C-3100 mobile phone  press 2945#*3101#
    LG C3380 C-3380 mobile phone  press 2945#*7101#
    LG F2300 F-2300 mobile phone  press 2945#*7101#
    LG KE260 KE-260 mobile phone  press 2945#*2601#
    LG KE970 KE-970 mobile phone  press 2945#*9701#
    LG KG120 KG-120  mobile phone  press 2945#*1201#
    LG KG220 KG-220 mobile phone  press 2945#*1201#
    LG KG240 KG-240 mobile phone  press 2945#*3311#
    LG KG280 KG-280 mobile phone  press 2945#*7101#
    LG KG290 KG-290 mobile phone  press 2945#*7101#
    LG KG800 KG-800 mobile phone  press 2945#*7101#
    LG KU250 KU-250 mobile phone  press 2945#*250#
    LG KU380 KU-380 mobile phone  press 2945#*380#

    After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

    For next models insert one SIM ,not the original SIM:

     (sim card that is not from the carrier that the phone is assigned to)
    LG KU311 KU-311 mobile phone press 815118#*#
    LG KU800 KU-800 mobile phone press 82652#*#
    LG L600v L-600v mobile phone press 815118#*#
    LG U8150 U-8150 mobile phone press 277634#*#
    LG U8210 U-8210 mobile phone press 277634#*#
    LG U8500 U-8500  mobile phone press 277634#*#
    LG U400 U-400 mobile phone press 2945#*88110#
    LG KC550 KC-550 mobile phone press 2945#*71001#
    LG KU580 KU-580 mobile phone press 2945#*580#
    LG KT520 KT-520 mobile phone press 2945#*520#
    LG KF750 KF-600 mobile phone press 2945#*750#
    LG KF600 mobile phone press 2945#*71001#
    LG KG275 KG-275  mobile phone press 2945#*20001#
    LG KU380 KU-380 mobile phone press 2945#*380#
    LG KU311 KU-311 mobile phone press 815118#*#
    LG KU800 KU-800 mobile phone press 82652#*#
    LG L600v L-600v mobile phone press 815118#*#
    LG U8150 U-8150 mobile phone press 277634#*#
    LG U8210 U-8210 mobile phone press 277634#*#
    LG U8500 U-8500 mobile phone press 277634#*#
    LG C3100 C-3100 mobile phone press 2945#*3101#
    LG C3380 C-3380 mobile phone press 2945#*7101#
    LG F2300 F-2300 mobile phone press 2945#*7101#
    LG KE260 KE-260 mobile phone press 2945#*2601#
    LG KG120 KG-120 mobile phone press 2945#*1201#
    LG KG220 KG-220 mobile phone press 2945#*1201#
    LG KG240 KG-240 mobile phone press 2945#*3311#
    LG KG280 KG-280 mobile phone press 2945#*7101#
    LG KS500 KS-500 mobile phone press 2945#*500#
    LG KP270 KP-270 mobile phone press 2945#*270#
    LG KF240 KF-240 mobile phone press 2945#*240# or 2945#*2401#
    LG KG290 KG-290 mobile phone press 2945#*7101#
    LG KU250 KU-250 mobile phone press 2945#*250#
    Enter NCK and press OK.

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Kenwood cellular mobile phone

    How to enter my Unlock Code on Kenwood ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    Model : All Kenwood cellular (mobile) phones
    1 – Switch ON your phone with a not Accepted SIM Card,
     (sim card that is not from the carrier that the phone is assigned to)
    2 – Enter the Unlock Code.

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Palm Handspring cellular mobile phones

    How to enter my Unlock Code on Palm Handspring ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    Model : Palm Tero 180 and Palm Tero 270
    1 – Switch ON your phone without SIM Card,
    2 – Compose : *#*#CODE#
    Model : Palm Tero 600
    1 – Switch ON your phone with Allowed SIM Card,
    2 – Go to Menu and select “Phone Tool” or “Phone Application”
    3 – Type on Virtual Keyboard *#*#CODE#
    4 – Select with PEN “Numer” and phone will show that’s unlocked now !
    or

    1 – Switch ON your phone with a not Allowed SIM Card,
    2 – Enter the Unlock Code.
    Model : Palm Pre and Palm Pre Plus
    1. Turn off cell phone – put in a not allowed SIM card.
    2. Turn on cell phone – phone asks for network unlock pin (referring to the unlock code).
    3. Enter pin number once (at this point there is no error)
    4. Phone states SOS only calls – when you try to make a regular call it will ask for the network unlock pin again. At this point no matter how many times you put in the pin. It will state incorrect pin message.
    5. Reboot phone with the same not allowed SIM card.
    6. After reboot, it’s unlocked and never asked for the network unlock pin again.

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Ericsson mobile cellular phone

    How to enter my Unlock Code on Ericsson ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    Model : All Ericsson cellular mobile phone
    1 – Switch ON your phone without SIM Card,
    2 – Press 1 time the left arrow,
    3 – Press 2 times the button * ,
    4 – Press 1 time the left arrow,
    5 – The message “Personalize with MNC2″ will appear,
    6 – You can now enter the Unlock Code we send to you.

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Code on Bosch Cellular Phones

    How to enter my Unlock Code on Bosch ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)
    All Bosch cellular phones (mobile phone)1 – Switch on your phone with a not allowed SIM Card,

     (sim card that is not from the carrier that the phone is assigned to)
    2 – When the message “Enter Network Key” appear enter the Code we send to you.

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock BlackBerry RIM cellular phones

    How to enter my Unlock Code on BlackBerry ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)

    Model : Blackberry 9530 Storm1. Insert any SIM card and turn ON your Blackberry.
    2. Turn OFF all the wireless connections.
    3. Go Back One Step by Pressing the Back Key.
    4. Go to Options
    5. Select SIM card.
    6. Press the Menu Key and select “Show Keyboard”.
    7. Tilt the phone in Horizontal Position so that the Keyboard is displayed in the Landscape Mode.
    8. Type MEPD [you will not be able to see the typed info].
    9. Then enter MEP2
    10. Now your Blackberry will ask you to enter network MEP code
    11. Enter the Unlock Code provided by us to you and Press the Enter Key on the Screen.
    12. It will now say “Code Accepted’.
    13. Congratulations! Your phone is now unlocked. Now your phone can be used with any GSM Network with SIM Card.
    14. Go back to the Home Screen. Press the Menu Button and click on Manage Connections.
    15. Turn all the Connections ON.The phone will now reboot and ”Activation Required” will no longer be displayed.Model : BlackBerry Bold 9000 & Torch1) Make sure your SIM card is NOT inserted into the device.
    2) Turn on the phone and click the “Manage Connections” icon. Choose the option “Turn off all connections.” The cellular radio will be turned off.
    3) Go back to the Home screen and click the “Options” icon and select “Advanced Options.”
    4) Scroll down and select “SIM Card” from the list.
    5) Press the following keys in order: (M) (E) (P) (E)
    6) A prompt will appear asking for the unlock code. Input the 16-digit code exactly.
    9) Reboot your device.
    10) Re-enable the cellular radio

    Model : Curve, 8300, 8310, 8320, 8800, 8820

    Must be done without a sim card inserted & wireless radios must be turned off.

    1. Go to settings.
    2. Go to options.
    3. Go to advanced options.
    4. Go to sim card.
    4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).
    5. It will say “Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm.
    6. Your phone is now unlocked.

    Model : BlackBery Storm 9500

    1. Insert any sim card
    2. Turn off all of the wireless connections
    3. Go to Options
    4. Select Advanced Options
    5. Select SIM Card
    6. Hit menu select show keybord
    7. Enter mepd (you will not be able to see the typed info)
    8. Enter mep2
    9. Now it will say enter network mep code

    Model : BlackBerry 8700

    Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

    Model : BlackBerry 8800

    ***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

    1 – Go to settings menu => and then Options
    2 – Select Advanced options => and then Sim card
    3 – Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    4 – Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    5 – You should be presented with a prompt “Enter Network MEP Code”. Type in the 16 digit unlock code received from Gsmadmin.com and press in the track wheel / jog dial to confirm
    6 – Your phone is now unlocked

    Model : BlackBerry 8100 Pearl

    1 – Go to Options Menu => Advanced Options
    2 – In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
    3 – You’ll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
    4 – Enter the unlock code.

    ———

    Model : BlackBerry 8100 (Vodafone Australia)

    PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

    This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

    1. Take note of the unlocking code shown above

    2. Insert a Non-Vodafone Australia working SIM card.

    3. Ensure the phone is charged and then switch the phone on.

    4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

    5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

    6. Select “Turn Wireless Off”

    7. Select “Settings” Menu , then go to Advanced Options > SIM Card

    8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

    9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

    10. Reset the phone by pulling the battery

    11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

    Please Note:

    If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

    To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

    FAQ:

    Question: My phone asks to enter a PIN number

    Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

    Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

    Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards – The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly “” Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

    Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

    Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

    ——————–

    Model : All BlackBerry

    1 – Using the menu go to Settings Menu -> SIM card pressselect.
    2 – While holding the SHIFT key, type mepd
    3 – You should now see the five locking categories listed.
    4 – While holding the SHIFT KEY, type mep2.
    5 – Release the shift key.
    6 – You are now prompted to enter the Network MEP code (it will also state how many attempts left)
    7 – Enter the code
    8 – Enter Return/Enter
    9 – The device should then be unlocked

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock BENQ mobile phone

    How to enter my Unlock Code on BENQ ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)

    All Benq mobile cellular phones

    1 – Switch ON your phone with a not allowed SIM Card,
    2 – Enter the Unlock Code we send to you. (sim card that is not from the carrier that the phone is assigned to)

    (you do need to get the unlock code from either the carrier or you can get it from your carrier or any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com

     
  • Unlock Alcatel mobile phone

    How to enter my Unlock Code on Alcatel ?

    Curtsy of xyzunlock  (unlocking service for wholesalers & retailers)

    Model : Method Generic

    1 – Switch ON your phone without SIM Card,
    2 – Then compose : *#0000*CODE#,
    3 – To finish compose : *#0001*CODE#.

    Models  Alcater  531 and Alcatel 535

    1 – Switch ON your phone without SIM Card,
    2 – Press * and without release compose 787292,
    3 – A new menu “Unlock Network” will appear, then select “YES”,
    4 – Enter the Code we send to you.

    All other Alcatel

    1 – Switch on your phone with a not allowed SIM Card, (sim card that is not from the carrier that the phone is assigned to)
    2 – When the message “Enter Network Key” appears enter the unlock Code

    (you do need to get the unlock code from either the carrier or you can get it from any unlock cellular phone service)

    If you are looking for an unlock service you can use www.XYZunlock.com